Kollektsioon: Reading lamps

Wall lamp with a gooseneck and built-in LED covered by a milky diffuser for soft lighting. The switch is located at the base of the lamp.

Wall lamp with a switch and GU10 socket for LED light sources.

A retro-style floor lamp for E27 light sources.

Metal wall lamp with a tilting reflector for LED sources with an E14 socket. The switch is located on the back of the shade.

Cylindrical spotlight on a round base with a GU10 socket for LED light sources.

Floor lamp with two directional spotlights for GU10 LED sources.

Surface-mounted tubular LED light on a circular base.

Surface mounted spotlight for two GU10 LED light sources.

Flexible solution that can be supplemented with either a decorative light source or a light shade. Attached to either wall or ceiling using grips along a black textile cable. The set is available with either 4 black plastic or chrome-plated grips. Extra grips can be ordered separately. Suitable shades: ARISTA, ASPRO, DOUBLE, JAKARANDA, RON.

Surface-mounted flat LED-fixture with the ability to tilt and rotate the light section. The fixture can be used on both walls and ceilings.

Wall lamp with integrated LED, rotatable shade and switch on the base.

Wall lamp with a rounded reflector on gooseneck, integrated LED and a switch located on the base.

LED spotlight for use in VEGA 24V= or WAVE 24V= systems. Two pieces of the conductive clip (R14328) must be ordered separately to connect the light to the WAVE textile strip. Dimming is available when controlled through the TUYA bridge or TUYA remote control.

Wall-mounted lamp featuring an adjustable spotlight and a movable arm on the horizontal axis, suitable for GU10 LED light sources.

Wall-mounted light with a conical reflector for an LED bulb with a GU10 base, featuring a toggle switch on the fixture's base.

Surface-mounted fixture with a cylindrical reflector on a square base, suitable for LED light sources with a GU10-base.

Wall-mounted work light with an adjustable arm and toggle switch at the bottom of the base.

Retro-style wall lamp for energy efficient GU10 light sources.

Elegantly designed wall lamp with chrome-plated details, a black LED spotlight and red textile cable.

Wall lamp with a textile shade and a LED spotlight on gooseneck. Both light sources can be controlled individually by switches located on the angular base of the lamp.

Wall lamp with built in LED on a rectangular base.

Shelf with built in LED and USB port for charging of cell phones. Both the indirect light source and the gooseneck spotlight are toggled by individual switches.

Floor lamp with a directional spotlight for GU10 LED sources.

Elegant LED pendant suitable to hang over bar counters or kitchen islands.

Wooden table lamp stand with E27 socket. Suitable shades: CONNY 15/30, DELI 30/20, DELISA 25/16, RON 15/20.

A table lamp with a wooden adjustable arm, a lacquered metal base, and a fabric shade. Includes a black braided power cord.

Wall lamp with built-in LED and a rotating reflector, providing single-direction indirect lighting. The reflector and indirect lighting are controlled by separate switches on the base.

Wall-mounted LED light featuring an adjustable spotlight and indirect UP/DOWN lighting. Both the spotlight and indirect lighting are controlled by separate switches on the base.

Floor lamp stand designed for general lighting, with an additional reading arm and two E27 sockets for LED light sources. Compatible with the following shades: AMBITUS 46/24, CONNY 30/25, JAKARANDA, NIZZA 18/15, RIDICK, RON 15/20, RON 40/25.

Linear adjustable LED light for use in VEGA 24V= or WAVE 24V= systems. Two pieces of the conductive clip (R14328) must be ordered separately to connect the light to the WAVE textile strip. Dimming is available when controlled through the TUYA bridge or TUYA remote control.

LED spotlight for use in VEGA 24V= or WAVE 24V= systems. Two pieces of the conductive clip (R14328) must be ordered separately to connect the light to the WAVE textile strip. Dimming is available when controlled through the TUYA bridge or TUYA remote control.

Linear adjustable LED light for use in VEGA 24V= or WAVE 24V= systems. Two pieces of the conductive clip (R14328) must be ordered separately to connect the light to the WAVE textile strip. Dimming is available when controlled through the TUYA bridge or TUYA remote control.

Directional LED spotlight in white with anthracite details.

Wall-mounted spot light in a combination of natural cork and painted metal for LED light sources with a GU10 socket.

Surface-mounted tubular LED light on an angular base.

A clip-on lamp with a conical shade, built-in LED, gooseneck arm, and a dimmer switch located on the clip. The maximum clip span is 2.5 cm and it features three-step dimming.

Wall lamp base with a horizontal adjustable jointed arm, ideal for combining with shades featuring an E27 screw fitting, such as the AMBITUS 24/15 and RON 15/20.

Floor lamp with built-in LED and two spotlights with frosted diffusers for soft lighting.

LED wall light with tilt-function and a milky diffuser for soft, even illumination.

Brass floor lamp with decorative elements imitating black marble for E27 LED light sources.

Wall lamp with a rotatable saucer-shaped head, built-in LED and an opal-colored diffusor.

Round rotatable metal shade with a base, for use with a suitable E27 light source.

Floor lamp with E27 socket.

Desk lamp with integrated LED on gooseneck and switch located on the base. The rectangular reflector gives a wide dispersion of light. PUSH TO DIMM dimming.

Retro-style desk lamp for energy efficient GU10 light sources.

Floor lamp of angular design with two directional LED spotlights.

Wall lamp with a textile shade and an adjustable arm.

Table lamp in angular design with an directional LED spotlight.

Wall lamp with a textured textile shade and a 3W LED reading light, both of which can be controlled individually by separate switches at the bottom of the base.

Wall light with a shade of mirror glass and a chrome-plated base.